Management Function Choice-Key Counter Only - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
14.3.6

Management Function Choice-Key Counter Only

A. Use
• To set whether or not the key counter is installed.
• Set when the key counter is mounted.
• Select [Color Mode] and [Message] when the key counter is mounted.
✽ Color Mode
• When [Mode 1] is set on [Total Counter Mode] after selecting [Billing Setting] → [Counter
setting].
Mode 1: 1 count per 1 print cycle
Mode 2: 2 counts per 1 print cycle
Mode 3: 3 counts per 1 print cycle
Mode 4: 4 counts per 1 print cycle
Mode 5: 5 counts per 1 print cycle
• When [Mode 2] is set on [Total Counter Mode] after selecting [Billing Setting] → [Counter
setting] and large size is selected on [Large Size Counter Mode]
Mode 1: 2 counts per 1 print cycle
Mode 2: 4 counts per 1 print cycle
Mode 3: 6 counts per 1 print cycle
Mode 4: 8 counts per 1 print cycle
Mode 5: 10 counts per 1 print cycle
• When [Mode 2] is set on [Total Counter Mode] after selecting [Billing Setting] → [Counter
setting] and sizes other than large size are selected on [Large Size Counter Mode]
Mode 1: 1 count per 1 print cycle
Mode 2: 2 counts per 1 print cycle
Mode 3: 3 counts per 1 print cycle
Mode 4: 4 counts per 1 print cycle
Mode 5: 5 counts per 1 print cycle
✽ Message
Select the message type when the administrative unit is mounted.
Type 1: Message for key counter
Type 2: Message for card scanning
Type 3: Message for ID management
Type 4: Message for remote SW
✽ Confirmation copy
• Set whether to allow a confirmation copy when a key counter is installed.
• The default setting is Ban.
✽ The next job reservation
• Set whether to allow the reservation of the next job when a key counter is installed.
• The default setting is Ban.
NOTE
• The setting is available only when user authentication and account track are set
"OFF" with [Administrator Settings] → [User Authentication/Account Track] →
[General Setting].
License
License
14. BILLING SETTING
"Ban"
"Ban"
523