Management Function Choice-Authentication Device 1; Management Function Choice-Authentication Device 2 - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
14.3.4

Management Function Choice-Authentication Device 1

A. Use
• To set whether or not the authentication device 1 is installed.
• Set when the authentication device 1 (PageACSES) is mounted.
B. Procedure
NOTE
• The setting is available only when user authentication and account track are set
"OFF" with [Administrator Settings] → [User Authentication/Account Track] →
[General Setting].
• When the Authentication Device mount setting is set to "mount", make sure that
the [IP Address Fax] and [Internet Fax] settings are set to "OFF" with [Service
Mode] → [System 2] → [Network Fax Settings].
14.3.5

Management Function Choice-Authentication Device 2

A. Use
• To set whether or not the authentication device 2 is installed.
• Set when the authentication unit (biometric type or card type) is mounted.
Card 1 : Uses IC card authentication system (AU-201)
Card 2 : Uses loadable device card authentication system
Bio1 : Uses biometrics (finger vein) authentication system (AU-101)
Bio2 : Uses biometrics (finger vein) authentication system (AU-102)
• When selecting [Bio1], set a film timeout interval.
• When selecting [Bio2], set a film timeout interval, capture trial time and authentication
trial time.
• When selecting [Card 1] or [Card 2], a response timeout interval is displayed.
(The interval is unchangeable.)
• When the setting is set to Card 2, the main power switch must be turned OFF and ON to
let the new setting take effect.
• Selecting Card 2, a loadable device driver allows to install.
B. Procedure
<Authentication Mode>
Card 1
(1) Installing method of the loadable device driver
• The firmware is updated using the USB memory device.
NOTE
• NEVER remove or insert the USB memory device with the machine power turned
ON.
1. Prepare a USB memory device on which the driver data of the loadable device to be
used was written.
2. Turn OFF the main power switch.
Card 2 Bio1
14. BILLING SETTING
Bio2
521