Coverage Rate Screen; Jam Code Display Setting - Konica Minolta bizhub C360 Service Manual

12. SERVICE MODE
(1) Test Pattern in User Paper Settings
• The printable test pattern for user paper settings is provided to ease determining the
most appropriate 2nd image transfer output value when customizing user paper.
• This test pattern changes output voltage as shown below based on the standard voltage
A (voltage determined by the 2nd image auto transfer voltage control) on a sheet of
paper.
12.9.19

Coverage Rate Screen

A. Use
• To set whether or not to display a coverage rate on the sales counter screen and sales
counter list.
B. Procedure
• The default setting is Display.
12.9.20

JAM Code Display Setting

A. Use
• To set whether or not to add a jam code to a jam warning display on the control panel
when a jam occurs.
B. Procedure
• The default setting is Do Not Display.
450
"Display"
Display
Field Service Ver. 2.1 Feb. 2012
A +600 V
A +400 V
A +200 V
A 0 V
A -200 V
A -400 V
A: Standard voltage
A -600 V
Do Not Display
"Do Not Display"
A0P0F3C539DA