Konica Minolta bizhub C360 Service Manual page 190

Field Service Ver. 2.1 Feb. 2012
(2) Winding of the scanner drive cables
[3]
[4]
[2]
[1]
[2]
[1]
A0EDF2C260DA
[3]
[4]
A0EDF2C261DA
[1]
A0EDF2C262DA
5. OTHER MAINTENANCE ITEMS
<Front side>
1. Set the round bead [1] of the scan-
ner drive cable (silver) into the hole
of the pulley [2] as shown in the illus-
tration.
NOTE
• Make sure that the bead securely
rests in the hole of the pulley.
2. Twist the scanner drive cable [3] (of
which side has the bead at the end)
around the pulley 4 times as shown
in the illustration.
3. Twist the hook side scanner drive
cable [4] around the pulley 4 times
as shown in the illustration.
NOTE
• Make sure that no part of the cable
rides on the other.
<Rear side>
4. Set the round bead [1] of the scan-
ner drive cable (black) into the hole
of the pulley [2] as shown in the illus-
tration.
NOTE
• Make sure that the bead securely
rests in the hole of the pulley.
5. Twist the scanner drive cable [3] (of
which side has the bead at the end)
around the pulley 4 times as shown
in the illustration.
6. Twist the hook side scanner drive
cable [4] around the pulley 4 times
as shown in the illustration.
NOTE
• Make sure that no part of the cable
rides on the other.
<Same for the front and the rear>
7. Apply the tape to fix the scanner
drive cable to the pulley [1].
135