5. OTHER MAINTENANCE ITEMS
[1]
[2]
[2]
[3]
[4]
5.5.73
Developing clutch/K (CL6)
1. Remove the high voltage unit.
See P.104
[1]
128
A0EDF2C027DA
[1]
[5]
A0EDF2C219DA
[2]
A0EDF2C220DA
Field Service Ver. 2.1 Feb. 2012
5. Remove the screw [1], and remove
the connector cover [2].
6. Disconnect the connector [3], and
remove the harness from the wire
saddle [1] and the edge cover [2].
7. Remove the E-ring [4], and remove
the manual paper feed clutch [5].
NOTE
• When mounting the manual paper
feed clutch, set the convex part of
the stopper into the concave part of
the manual paper feed clutch [5].
2. Remove the screw [1], and remove
the metal plate [2].