Bootup Screen - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
12.9.21

BootUp Screen

A. Use
• To customize the BootUp Screen displayed upon machine start-up.
• Use this feature when changing the KonicaMinolta logo displayed on the control panel
upon start-up to a client company logo or others for client's intended use of the machine.
• Register logo data in the machine's flash ROM via a USB memory device.
The following are the logo data specifications that should be met.
Image format
File extension
File name
Image size
Color
NOTE
• When making the logo data, use the exclusive image making tool.
• If a USB memory device is not connected or a nonconforming USB memory device
is connected, "USB NG" is displayed and logo data cannot be registered.
• If the file name of logo data does not conform to the above specifications, "File
NG" message is displayed and logo data cannot be registered.
B. Procedure
1. Save logo data that conforms to the above specifications in the root directory of a USB
memory device.
NOTE
• Be sure to save data in the root directory as the machine cannot detect data saved
in other directories.
2. Connect the USB memory device to the machine USB port.
3. Select the key as follows.
[System 2] → [
4. Touch [Set].
5. Check result "OK" is displayed and touch [END].
NOTE
• If logo data is already registered, new logo data overwrites the existing logo data.
• The color of logo data may look different between the machine control panel and
some PC screens. After registering logo data, restart the machine and check the
color of the logo data on the BootUp screen.
* To delete registered data, touch [Delete] and check result "OK" is displayed.
: PNG format
: *. png
: BootupScreen.png
: 800 x 480 dots
: 256 colors (Palette that the machine specifies is used.)
] → [BootUp Screen].
12. SERVICE MODE
451