3. OTHER MAINTENANCE ITEM
3.3.14
Reading roller pressure/retraction motor (M4)
1. Remove the front cover.
See P.17
[3]
[2]
6. Reinstall the above parts following the removal steps in reverse.
30
[1]
A0HUF2C021DA
[1]
A0HUF2C022DA
Field Service Ver. 1.0 Jul. 2009
2. Remove three screws [1].
3. Remove the harness from the wire
saddle [1].
4. Disconnect two connectors [2].
5. Remove the reading roller pressure/
retraction motor assy [3].