Custom Display Settings-Copier Settings - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
10.5.12

Custom Display Settings-Copier Settings

A. Default Tab
(1) Use
• Selects a default tab display in the copy mode.
Basic : Normal basic screen
Quick Copy : This screen displays all options that can be selected for Paper, Zoom, and
Duplex/Combine functions.
For color functions, all selectable options can be displayed on the screen.
The normal [Basic] screen is also displayed as another tab on the screen.
(2) Procedure
• The default setting is Basic.
B. Shortcut Key 1/2
(1) Use
• Selects whether to use the shortcut key.
• Adds frequently used shortcut keys of auxiliary functions to the basic screen.
(2) Procedure
• The default setting is OFF.
• When this setting is set to ON, select auxiliary functions to get their shortcut keys dis-
played on the screen.
C. Quick Settings 1, 2, 3, 4
• It will be displayed in bizhub C652/C552 machines where the firmware version is function
enhancement 1 or later and in all bizhub C452 machines.
(1) Use
• Allows you to register setting conditions for frequently used copy functions and place
them on the basic settings screen.
• The registered setting condition can be invoked by only pressing the corresponding easy
setting key.
(2) Procedure
• The default setting is OFF.
• When this setting is set to ON, select the copy functions you wish to register.
D. Default Tab Density Settings
2
(1) Use
• Specify whether to display the copy density setting in the basic settings screen. If [ON] is
selected, you can press [Dark] or [Light] in the basic settings screen to adjust the copy
density.
(2) Procedure
• The default setting is OFF.
• If [ON] is selected, [Quick Settings 3] and [Quick Settings 4] cannot be specified.
"Basic"
ON
ON
ON
10. UTILITY
Quick Copy
"OFF"
"OFF"
"OFF"
193
2