Fusing Transport Speed; Org. Size Detecting Sensor Adj - Konica Minolta bizhub C360 Service Manual

12. SERVICE MODE
12.4.2

Fusing Transport Speed

A. Use
• To adjust the speed of the fusing motor so as to match the fusing speed with transport
speed.
• Brush effect or blurred image is evident as a result of changes in environmental condi-
tions or degraded durability.
B. Procedure
1. Call the Service Mode to the screen.
2. Touch these keys in this order: [Machine] → [Fusing Transport Speed].
3. Select the transport speed, at which the brush effect or blurred image has occurred.
<bizhub C360/C280>
Transport speed
165 mm/s Plain paper: black/color
55 mm/s Plain paper: black/color (Glossy)
Thick 1, Thick 2, Thick 3, Thick 4, envelope, postcard: black/color
OHP film: black
<bizhub C220>
Transport speed
110 mm/s Plain paper: black/color
55 mm/s Plain paper: black/color (Glossy)
Thick 1, Thick 2, Thick 3, Thick 4, envelope, postcard: black/color
OHP film: black
4. Enter the new setting from the 10-key pad.
If brush effect is evident, vary the setting value and check for image.
If a blurred image occurs, decrease the setting.
5. Touch [END] to validate the adjustment value.
6. Check the print image for any image problem.
12.4.3

Org. Size Detecting Sensor Adj.

A. Use
• To automatically adjust the original detection distance for the original size detection sen-
sor/1.
• To display if the original size detection sensor/2 is mounted.
• When the sensor is replaced with a new one.
• When an optional sensor has been added.
• When an erroneous original size detection is made.
• When the marketing area setting is changed.
B. Procedure
1. Place a blank sheet of A3 or 11 x 17 paper on the original glass and lower the original
cover.
2. Call the Service Mode to the screen.
3. Touch these keys in this order: [Machine] → [Org. Size Detecting Sensor Adj.].
4. Press the Start key.
If the adjustment has been successfully made, it completes the adjustment procedure.
If the adjustment has turned out to be unsuccessful, check the optional original size sen-
sors for correct installation and change the defective sensor or harness.
372
Field Service Ver. 2.1 Feb. 2012
Paper Setting
Paper Setting