3. OTHER MAINTENANCE ITEM
[1]
[2]
7. Reinstall the above parts following the removal steps in reverse.
3.3.17
Exit roller retraction motor (M9)
1. Remove the upper cover.
See P.11
2. Remove the front upper cover.
See P.12
[3]
[2]
5. Reinstall the above parts following the removal steps in reverse.
26
6. Remove two screws [1], and remove
A0HRF2C034DA
3. Disconnect the connector [1].
[1]
4.
A0HRF2C035DA
Field Service Ver. 1.0 Jul. 2009
the tray1 path switching motor [2].
Remove two screws [1], and remove
the exit roller retraction motor [2].