Field Service Ver. 2.1 Feb. 2012
10.6.73
Fax Settings-PBX Connection Setting
A. Use
• To set whether to use PBX connection setting or not.
• This will be used when the machine is connected to PBX line.
B. Procedure
• The default setting is No.
• When set to [Yes], enter the external number between 0 and 9999.
10.6.74
Fax Settings-Report Settings
A. Activity Report
• It will not be displayed when the following setting shows that vendor or authentication
device is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(1) Use
• To set whether to print out the activity report or not, and also the timing for printing.
(2) Procedure
• The default setting is ON.
• When this setting is set to ON, make the setting of Output Setting.
• The default setting is Every 100 Comm.
Daily
B. TX Result Report
(1) Use
• To set whether to print out the TX report, and also the timing for printing.
(2) Procedure
• The default setting is If TX Fails.
ON
C. Sequential TX Report
(1) Use
• To set whether to print out the sequential TX report or not.
(2) Procedure
• The default setting is ON.
D. Timer Reservation TX Report
(1) Use
• To set whether to print out the reservation TX or not.
(2) Procedure
• The default setting is ON.
"ON"
"Every 100 Comm."
"If TX Fails"
"ON"
"ON"
10. UTILITY
OFF
100/ Daily
OFF
OFF
OFF
327