Konica Minolta bizhub C360 Service Manual page 320

Field Service Ver. 2.1 Feb. 2012
(3) ID & Print Settings
<Use>
• To set whether to use ID & Print (a job sent by a user cannot be printed until the user
authentication is completed).
• To set whether to print a job of unauthenticated or public user or to save the job into the
ID & Print User Box.
<Procedure>
<ID & Print>
• The default setting is OFF.
<Public User>
• The default setting is Print Immediately.
"Print Immediately"
(4) ID & Print Operation Settings
• It will be displayed only when the following setting shows that authentication device is set
to "installed".
[Service Mode] → [Billing Setting] → [Management Function Choice]
<Use>
• To set whether to print all jobs or only one job from the same authenticated user when ID
& Print is selected.
<Procedure>
• The default setting is Print All Jobs.
(5) Default Operation Selection
2
<Use>
• In the Login screen for user authentication where ID and print jobs are stored, specify the
default values for the operation to be carried out after authentication has been com-
pleted.
When using this machine while the ID & print function is disabled, the user can select
[Access] to log in to this machine without specifying the operation to be carried out after
authentication.
<Procedure>
• The default setting is Print.
"Print"
ON
"Print All Jobs"
Print & Access Basic Screen
10. UTILITY
"OFF"
Save
Print Each Job
Access Basic Screen
265
2