Konica Minolta bizhub C360 Service Manual page 290

Field Service Ver. 2.1 Feb. 2012
(3) Image Stabilization Setting
<Use>
• To change the type and timing of image stabilization.
• To provide the desirable image stabilization control that depends on customer's machine
usage pattern, i.e. the ratio of color to black print.
Standard
Color Priority
Black & White Priority : This mode is suitable for users who use mainly black print and
<Procedure>
• The default setting is Standard.
"Standard"
: This mode is suitable for low-volume users and reduces the
number of times image stabilization is carried out when the
main power switch is turned ON.
If the change of absolute humidity is detected during warm-up,
normal stabilization is performed during warm-up.
: This mode is suitable for high-volume and high ratio of color
print users.
Color stabilization sequence is performed unconditionally
when the main power switch and the sub power switch are
turned ON.
use less color print. It provides monochrome stabilization and
reduces the number of times image stabilization is carried out
when the main power switch is turned ON. If the change of
absolute humidity is detected during warm-up, monochrome
stabilization is performed during the warm-up and color stabili-
zation is performed before color printing.
Color Priority
10. UTILITY
Black & White Priority
235