Accommodation Roller Retraction Motor (M10); Stapler Movement Motor (M11) - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 1.0 Jul. 2009
3.3.18

Accommodation roller retraction motor (M10)

1. Remove the upper cover.
See P.11
2. Remove the front upper cover.
See P.12
[2]
[3]
5. Reinstall the above parts following the removal steps in reverse.
3.3.19

Stapler movement motor (M11)

1. Remove the finisher from the main body.
See P.14
2. Remove the upper cover.
See P.11
3. Remove the rear cover.
See P.11
[2]
[1]
A0HRF2C036DA
[1]
A0HRF2C037DA
3. OTHER MAINTENANCE ITEM
3. Disconnect the connector [1].
4. Remove two screws [2], and remove
the accommodation roller retraction
motor [3].
4. Remove the harness from four wire
saddles [1].
5. Disconnect the connector [2].
27