Lattice Pattern - Konica Minolta bizhub C360 Service Manual

12. SERVICE MODE
12.13.4

Lattice Pattern

A. Use
• To produce a lattice pattern.
• Used for checking fine line reproducibility and uneven density.
• A reverse pattern is also used to check for fine line reproducibility of white letters on a
solid background.
<Test pattern>
B. Procedure
• # of Print ("1" to 999)
• Select "SINGLE" (single copy) or MULTI (multi copy).
• Select "FEET" or HYPER.
• Select "Gradation", Resolution or Error diffusion if HYPER has been selected.
• Select"1-Sided", 2-Side1 or 2-Side2.
2-Side1: The same pattern is printed on both front and back sides.
2-Side2: The front side is blank and the pattern is printed on the back side.
• Select Gradation or Resolution. (Only select HYPER)
• Select the color mode.
"Cyan", Magenta, Yellow, Black (4PC), Red, Green, Blue, CMYK, 3 Color,
4 Color, Black (1PC)
• Enter CD width and FD width (0 to 191 dots).
• Type the density level (0 to "255").
• Select "Normal" or Reverse.
482
Field Service Ver. 2.1 Feb. 2012
SINGLE
FEET
Cyan
CD Width: 5
FD Width: 5
Density: 255
Normal
A0P0F3C520DA