Konica Minolta bizhub C360 Service Manual page 286

Field Service Ver. 2.1 Feb. 2012
(2) Half-Fold Position
<Use>
• Use this adjustment to adjust the half-fold position in half-fold printing.
<Procedure>
1. Place two sheets of originals on the ADF.
2. Make a copy in the folding mode.
3. Fold the copies along the crease.
4. Measure the amount of deviation (A).
Specification A: 0 ± 1.0 mm
Adjustment range: -10.0 mm to +10.0 mm (1 step: 0.1 mm)
5. If (A) is out of the specified range, make the following adjustment.
6. Call the Administrator Settings to the screen.
7. Touch [System Settings] → [Expert Adjustment] → [Finisher Adjustment] → [Half-Fold
Position].
8. Touch the paper size where half-fold position is adjusted.
9. Look at the copy and adjust the half-fold position with the [+]/[-] key.
10. Touch [OK].
11. Make another set of copy sample and check the amount of deviation (A).
Exit direction
10. UTILITY
A
A11PF3C502DA
A11PF3C503DA
231