Printer Settings-Ps Setting - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
10.5.49

Printer Settings-PS Setting

A. Print PS Errors
(1) Use
• To set whether to print or not the error information when an error occurred during PS ras-
terizing.
(2) Procedure
• The default setting is OFF.
B. ICC Profile Settings
(1) Use
• To select a profile to be used for print jobs from a computer when a profile is not specified
by printer driver.
• Possible to set a profile separately for each of the following items.
Photo-RGB Color
Photo-Output Profile
Text-RGB Color
Text-Output Profile
Figure/Table/Graph-RGB Color
Figure/Table/Graph-Output Profile
Simulation Profile
(2) Procedure
• The default settings are shown below.
Photo-RGB Color
Photo-Output Profile
Text-RGB Color
Text-Output Profile
Figure/Table/Graph-RGB Color
Figure/Table/Graph-Output Profile : Auto
Simulation Profile
C. Auto Trapping
(1) Use
• Select this option to superimpose neighboring colors to print so as to prevent white
space being generated around a picture.
ON : Adjacent colors are overprinted. If white lines appear at borders of colors on a
graph or figure, select "ON."
OFF : The data is printed as is without being trap-processed.
NOTE
• If color-dulling results at the border of colors when "ON" is selected, change it to
"OFF."
• Trapping process is sometimes specifiable with the application. When the trap-
ping process is specified in the application, select "OFF" on the machine side.
(2) Procedure
• The default setting is OFF.
ON
: Device Color
: Auto
: Device Color
: Auto
: Device Color
: None
ON
10. UTILITY
"OFF"
"OFF"
211