Konica Minolta bizhub C360 Service Manual page 745

20. NETWORK ERROR CODE
Function Code
SMB browsing 32
42
57
62
67
4096
4097
4098
4099
4102
4105
4352
4353
4354
4355
4368
4369
4370
10000
12236
12239
12240
12241
12242
12243
12244
12263
12264
12266
690
• The connection has been interrupted.
• The specified protocol is unavailable.
• Failed to connect to the server.
• The device is not connected to the network.
• The internal channel detected an error immediately before establishing
communication.
• The host is shut down.
• The group name/host name is not specified.
• The specified group name/host name does not exist on the network.
• The user name is not specified.
• Unable to log in with the specified user name and password.
• Failed to log in due to an SMB protocol error.
• Administrative shares do not exist.
• The shared resource name is not specified.
• The shared resource does not exist.
• The user name is not specified.
• Unable to log in with the specified user name and password.
• Failed to log in due to an SMB protocol error.
• The specified media to be written is not formatted.
• The file system of the specified media to be written is faulty.
• Other errors to which an error code is not assigned.
• The browser machine (master browser/backup browser) is not found.
• Unable to log in to the browser machine (master browser/backup
browser).
• The sub folder does not exist.
• The request is not accepted due to an invalid call sequence etc.
• The number of groups is too large.
• The number of host PCs is too large.
• The number of shared resources is too large.
• Failed in authentication using a PKI card.
• The certificate has expired, or the validity period has not yet started.
• The certificate does not have the expected usage.
• The certificate is not trusted. To trust the certificate, the certificate must
be registered to the system.
• The certificate has expired.
• The CA server rejected the connection.
• The connection to the server that checks for expiration of the certificate
has timed out.
• Unable to check for expiration because the CRL size exceeds the maxi-
mum capacity that can be retained (1 MB).
• Although the environment is configured to use the HDD, it is unable to
perform verification because the HDD path has not been specified.
• Unable to perform verification because there are too many certificates to
be verified (the maximum number of certificates that can be verified at a
time is 20).
• Internal error of the certificate verification.
Field Service Ver. 2.1 Feb. 2012
Description