Konica Minolta bizhub C360 Service Manual page 380

Field Service Ver. 2.1 Feb. 2012
B. Memory RX Setting
• It will be displayed only when the following setting is set to "ON."
[Service Mode] → [FAX] → [System] → [Display Setting] → [Compulsory Memory RX]
• It will not be displayed when [PC-FAX RX Setting], [Forward TX Setting] or [TSI User Box
Setting] is set to "ON."
2
(1) Use
• To set whether to use the forced memory RX function.
• To store the received text in the hard disk without printing, and print it out when ordered.
(2) Procedure
• The default setting is NO.
• Enter the password (up to 8 digits) for printing when set to [ON].
C. Closed Network RX
• It will be displayed when the following setting is set to "ON."
[Service Mode] → [FAX] → [System] → [Display Setting] → [Closed area RX]
(1) Use
• To set whether to use the closed network function.
• To receive data only from the device which password matches.
(2) Procedure
• The default setting is OFF.
• When set to [ON], enter the password (up to 4 digits) to be used.
D. Forward TX Setting
• It will not be displayed when [PC-FAX RX Setting], [Memory RX] or [TSI User Box Set-
ting] is set to "ON."
• It will not be displayed when the following setting shows that Vendor or Authentication
Device is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(1) Use
• To set whether to use the forward fax function.
• To forward the received text to the receiver which has been specified.
Forward & Print
Forward & Print (If TX Fails): Forward the received text, and prints out only when fails
(2) Procedure
<Forward TX Setting>
• The default setting is No.
• When set to [Yes], set the address to forward to.
: Forward the received text, and print all out
to be forwarded
10. UTILITY
325
2