Adjustment Of The Bypass Paper Size Unit - Konica Minolta bizhub C360 Service Manual

16. MECHANICAL ADJUSTMENT
16.2.3

Adjustment of the bypass paper size unit

This adjustment must be made in the following case:
• The bypass paper size unit has been removed.
[1]
[2]
[3]
[2]
4. After the bypass paper size unit base has been mounted, check that the lever of the
bypass paper size unit moves smoothly in a manner operatively connected to the
bypass guide.
5. Call the Service Mode to the screen and select [Machine] → [Manual Bypass Tray
2
Width Adj]. Then, carry out manual bypass tray width adjustment.
See P.388
536
2
[2]
[1]
A02EF2C523DA
[1]
A02EF2C524DA
Field Service Ver. 2.1 Feb. 2012
1. Align the match mark [1] on the
bypass guide rack gear with the
groove on the gear rim at two places
and install two bypass guide rack
gears [2].
2. When installing the manual CD size
sensor assy [3], make sure that the
part [1] (pointed by the arrow) on the
bypass guide rack gear and the
gear's hole [2] on the manual CD
size sensor assy are placed in a
straight line.
3. Secure the manual CD size sensor
assy with two screws.