Konica Minolta bizhub C360 Service Manual page 155

5. OTHER MAINTENANCE ITEMS
NOTE
After replacing the service EEPROM board, all parts shown below are required to be
replaced with new ones.
• Developing unit/Y,M,C,K
• Drum unit/Y,M,C,K
• Toner cartridge/Y,M,C,K
• Image transfer belt unit
• Fusing unit
NOTE
• When service EEPROM is replaced, data of all adjustment settings stored in
EEPROM disappear and the adjustment settings are returned to the default ones.
After replacing the service EEPROM board, take the following steps to make read-
justments.
4. Open the front door and turn OFF and ON the main power switch and sub power
switch.
5. Enter the Service Mode. Make individual adjustments shown in the following table in
the order listed, using the machine maintenance list and the adjustment lists that were
output at the time of main body installation and maintenance.
NOTE
• At this time, a front door must be an open state.
Order
1 Machine
2
3
4 Imaging Process
2
Adjustment
5
2
6
2
7 System 1
8 Machine
9 System 2
NOTE
• After replacing the service EEPROM board, be sure to make the above listed
adjustments before the first warm-up is made.
6. Turn OFF the main power switch and sub power switch.
7. Close the front door and turn ON the main power switch and sub power switch.
Check to see that warm-up and image stabilization operations are completed normally.
8. Enter the Service Mode again. Make individual adjustments shown in the following
table in the order listed, using the machine management list and the adjustment lists
that were output at the time of main body installation and maintenance.
Order
1 Machine
2
2
2
3
4 Finisher
100
2
Items that require readjustment in the Service Mode
Color Registration
Adjustment
Image Background Adj
Max Image Density Adj
Grad/Dev AC Bias V Selection
Change Warm Up Time
Exhaust Fan Stop Delay
Unit Change
Items that require readjustment in the Service Mode
Manual Bypass Tray Width Adj
Printer Reg. Loop Adj.
Fusing Temperature
FS-FN adjustment
Field Service Ver. 2.1 Feb. 2012
Cyan
Magenta
Yellow
Warning Display
Ref. page
P.385
P.393
P.392
P.398
P.436
P.386
P.441
Ref. page
P.388
P.384
P.371
P.498