User Authentication/Account Track-Scan To Authorized Folder Settings; Network Settings-Tcp/Ip Settings - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
10.6.35

User Authentication/Account Track-Scan to Authorized Folder Settings

A. Use
• Use to restrict specification of sending destinations by users.
• Enabling this item disables manual entry of destinations except for recipients of faxes or
IP address faxes. Therefore users can specify sending destinations only by accessing
the address book. Enabling this item also applies the following restrictions.
- Users cannot save documents to User Boxes
- Users cannot transmit documents from User Boxes
- Users cannot use annotation User Boxes
- Users cannot use the image panel
- Users cannot select addresses from the transmission history
- Users cannot use the URL notification function
B. Procedure
• The default setting is Do Not Limit.
10.6.36

Network Settings-TCP/IP Settings

A. TCP/IP Settings
(1) Use
• To set whether to enable or disable TCP/IP settings.
(2) Procedure
• The default setting is ON.
NOTE
• When the setting is changed, turn off the main power switch and turn it on again
more than 10 seconds after.
B. IPv4 Settings
(1) Use
• To set whether to enter the IP address (IPv4) directly or to obtain it automatically.
(2) Procedure
• The default setting is Auto Input.
• When it is set to [Auto Input], select the method to obtain it automatically.
DHCP Setting
BOOTP Setting
ARP/PING Setting : ON
AUTO IP Setting
NOTE
• [ARP/PING Setting] and [Auto IP Setting] cannot be set to "OFF" simultaneously.
• They will all be set to "ON" when [Manual Input] is changed to [Auto Input].
• When it is set to [Manual Input], set the IP address, subnet mask and default gate way.
Limit
"ON"
Manual Input
: ON OFF
: ON OFF
OFF
: ON OFF
10. UTILITY
"Do Not Limit"
OFF
"Auto Input"
271