Sensor Check - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
12.14.5

Sensor Check

A. Use
• To check sensors on the paper path.
• When a document misfeed occurs.
B. Procedure
1. Call the Service Mode to the screen.
2. Touch [ADF] → [Sensor Check].
3. Operate the sensor to check by using paper or the like, and check the screen display.
(Paper detected: 1, No paper detected: 0)
C. Sensor check screen
• This is only typical screen which may be different from what are shown on each individ-
ual main unit.
D. Sensor check list
Symbol Panel display
PS1 Feed Open&Shut
PS2 Read Open&Shut
PS3 Registration Sensor
2
PS4 After Separate
PS5 Exit Sensor
2
PS6 Read Roller
PS7 Reverse Roller
Part/Signal name
Feed open/close sensor
Read open/close sensor
Registration sensor
After separate sensor
Exit sensor
Read roller sensor
Reverse roller sensor
12. SERVICE MODE
A0HUF3E503DA
Operation characteristics/
panel display
1 0
Open Close
Open Close
Paper Paper not
present present
(Blocked) (Unblocked)
Paper Paper not
present present
(Unblocked) (Blocked)
Paper Paper not
present present
(Unblocked) (Blocked)
Pressure Retraction
(Blocked) (Unblocked)
Pressure Retraction
(Blocked) (Unblocked)
491
2