12.12.14 Memory/Hdd Adj.-Hdd Format; 12.12.15 Memory/Hdd State - Konica Minolta bizhub C360 Service Manual

12. SERVICE MODE

12.12.14 Memory/HDD Adj.-HDD Format

A. Use
• To format the hard disk.
• The function proceeds in the order of physical format to logical format.
• If the hard disk is yet to be formatted, the malfunction code "C-D010" will appear. Ignore
this code and continue with the formatting procedure.
• When the hard disk is mounted.
• When the hard disk is to be initialized. (Physical format to logical format)
NOTE
2.1
• As formatting of HDD deletes movie data and OCR dictionary data, after formatting
HDD, you need to reinstall these data as necessary.
B. Procedure
1. Call the Service Mode to the screen.
2. Touch these keys in this order: [State Confirmation] → [Memory / HDD Adj.] → [HDD
Format].
Physical Format
1. Touch [Physical Format].
2. Press the Start key to start the formatting sequence.
3. The sequence will be automatically terminated as it is completed.
4. Turn off the main power switch and turn it on again more than 10 seconds after.
NOTE
• If [HDD Encryption Setting] is not set to "ON," when the physical format is com-
pleted and the main power switch is turned OFF/ON, a message that prompts you
to set an encrypting word is displayed.
If you perform [HDD Encryption Setting], after setting an encrypting word, perform
the logical format.
Logical Format (only when initial is set up)
1. Touch [Logical Format].
2. Press the Start key to start the formatting sequence.
3. The sequence will be automatically terminated as it is completed.
4. Turn off the main power switch and turn it on again more than 10 seconds after.
✽ Formatting the hard disk will erase all data contained in it.

12.12.15 Memory/HDD State

A. Use
• To display the condition and amount of the memory and hard disk.
B. Procedure
• When the encryption board is mounted, the machine automatically recognizes it and dis-
plays [Set].
478
2.1
Field Service Ver. 2.1 Feb. 2012