Fs Control Board (Fscb) - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 1.0 Jul. 2009
[2]
5. Reinstall the above parts following the removal steps in reverse.
3.3.9

FS control board (FSCB)

1. Remove the finisher from the main body.
See P.14
2. Remove the rear cover.
See P.11
[1]
[2]
5. Reinstall the above parts following the removal steps in reverse.
[1]
A0HRF2C510DA
[1]
A0HRF2C014DA
3. OTHER MAINTENANCE ITEM
NOTE
• When installing the staple unit,
make sure to adjust the mark-off
line [1] with the notch [2].
3. Remove all connectors from the FS
control board.
4. Remove four screws [1], and remove
the FS control board [2].
17