16. MECHANICAL ADJUSTMENT
16.1.2
Positioning of the exposure unit and mirrors unit
This adjustment must be made in the following case:
• The scanner drive cables have been rewound
[2]
[1]
532
[2]
A0EDF3C001DA
[1]
A0EDF3C002DA
Field Service Ver. 2.1 Feb. 2012
1. While temporarily attaching the
exposure unit to the scanner drive
cables, move the mirrors unit [1] to
the center and hit the mirrors unit
against the side of the rails [2].
2. While keeping the mirrors unit hit
against the side of the rail, move the
temporarily attached exposure unit
[1] to the right on the scanner frame
as far as the exposure unit will go.