System Settings-Reset Settings - Konica Minolta bizhub C360 Service Manual

10. UTILITY
C. Meter Counter List
• Setting will be available only when the following setting shows that either authentication
device, management device 2, vendor 2 is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(1) Use
• To output the meter counter list.
• To print out the list in this setting because counter list cannot be printed when the follow-
ing setting shows that vendor is mounted.
[Meter Counter] → [Details]
(2) Procedure
1. Touch [Meter Counter List].
2. Select the Feed tray.
3. Select simplex or duplex print, and touch the Start key.
D. Check Consumables List
• Setting will be available only when the following setting shows that either authentication
device, management device 2, vendor 2 is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(1) Use
• To output the consumable life list.
• To print out the list in this setting because the list cannot be printed when the following
setting shows that vendor is mounted.
[Utility] → [Check Consumable Life]
(2) Procedure
1. Touch [Consumable Life List].
2. Select the feed tray.
3. Select simplex or duplex print, and touch the Start key.
10.6.9

System Settings-Reset Settings

A. System Auto Reset
(1) Use
• To set the period of time until system auto reset starts functioning.
(2) Procedure
<Priority Mode>
• To set the functions displayed during system auto reset from Copy and Scan/Fax.
• The default setting is Copy.
<System Auto Reset Time>
• The default setting is 1 min.
250
"Copy"
"1 min." (1 to 9, OFF)
Field Service Ver. 2.1 Feb. 2012
Scan/Fax