Security Settings-Administrator Password; Security Settings-User Box Admin. Setting - Konica Minolta bizhub C360 Service Manual

10. UTILITY
10.6.83

Security Settings-Administrator Password

A. Use
• To set/change the administrator password.
B. Procedure
• Enter the administrator password on the on-screen keyboard.
Current Password : Enter the current administrator password
New Password
Re-Input Password : Re-enter the new administrator password
NOTE
• When selecting [Utility/Counter] → [Administrator Settings] → [Security Setting] →
[Security Details] leads to [Password Rules] being ON, the password with the
same letters, the password which is same as the previous one and the password
of less than eight digits cannot be changed.
10.6.84

Security Settings-User Box Admin. Setting

• Setting is disabled if user authentication or account track is not performed.
A. Use
• To set whether to allow or restrict the box administrator to use the system.
• To allow the box administrator to use the system.
The box administrator is the special administrator for box, who is allowed to browse con-
tents in common box / individual box without the password.
NOTE
• [Allow] cannot be set when the user authentication or account track is not carried
out.
B. Procedure
• The default setting is Restrict.
NOTE
• [Allow] cannot be selected when user authentication and account track are not
conducted.
• [Allow] cannot be selected when the following setting is set to "ON."
[Administrator Settings] → [Security Settings] → [Enhanced Security Mode]
• Set the password when setting to [Allow].
NOTE
• When the following setting shows that [Password Rules] is set to "ON", the Pass-
word using only a single letter or the password same with the previous one, or the
password with less than eight letters cannot be accepted.
[Administrator Settings] → [Security Settings]
338
: Enter the new administrator password to be used
Allow
Field Service Ver. 2.1 Feb. 2012
"Restrict"