Skew Adjustment-Print Head Skew Reset - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
12.4.19

Skew adjustment-Print Head Skew Reset

2
A. Use
• Returns the skew correction motor to the default position and clear the backup copies of
the cumulative skew amount.
• After PH unit replacement, perform [Print Head Skew Adj.] and then execute this func-
2
tion.
• Use this feature when the information of the skew correction position that is backed up in
the machine is lost by replacing the service EEPROM board or other reasons.
• After addressing the alert code P-14 and completing an action to the problem, perform
this function.
• Use this function when the current skew correction motor's position becomes unavailable
due to the skew adjustment interrupted by the door being opened or the main power
switch being turned OFF.
B. Procedure
1. Call the Service Mode to the screen.
2. Touch these keys in this order:
[Machine] → [Skew adjustment] → [Print Head Skew Reset].
2
3. Touch the start key and execute the Print Head Skew Reset.
2
NOTE
• After replacing the PH unit or service EEPROM board, set the initial position of the
skew correction as follows: [Machine] → [Skew adjustment] → [Print Head Skew
Adj.]. After completing [Print Head Skew Adj.], perform [Print Head Skew Reset].
• After the Print Head Skew Reset is complete, be sure to perform [Initialize + Image
2
Stabilization].
12. SERVICE MODE
387
2