Network Settings-Smb Setting - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
F. FTP Server Settings
(1) Use
• To set whether to use this machine as FTP server.
(2) Procedure
• The default setting is ON.
NOTE
• [ON] cannot be selected when the following setting is set to "ON."
[Administrator Settings] → [Security Settings] → [Enhanced Security Mode]
10.6.40

Network Settings-SMB Setting

• It will not be displayed when the following setting shows that authentication device is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
A. Client Settings
(1) Use
• To set whether or not to use the SMB transmission setting.
• To set whether or not to enable the user authentication setting by NTLM.
• To set the NTLM version for the user authentication.
NTLM has v1 and v2. Select the version which suits the network environment.
(2) Procedure
<Client Settings>
• The default setting is ON.
<NTLM Settings>
• The default setting is v1.
"v1"
<User Authentication (NTLM)>
• The default setting is ON.
<DFS Setting>
• Select [ON] when using SMB transmission under an environment that uses a distributed
file system (DFS).
• The default setting is Enable.
"ON"
"ON"
v2
"ON"
"Enable"
10. UTILITY
OFF
OFF
v1/v2
OFF
Invalid
283