Replacing The Pick-Up Roller / Feed Roller - Konica Minolta bizhub C360 Service Manual

2. PERIODICAL MAINTENANCE PROCEDURE
2.1.3

Replacing the pick-up roller / feed roller

A. Periodically replaced parts/cycle
• Pick-up roller: Every 200,000 counts
• Feed roller: Every 200,000 counts
B. Procedure
1. Open the feed cover.
See P.15
[5] [2]
[4] [3] [1]
[3]
[5]
6
[2]
[1]
A0HTF2C003DA
[3] [4]
[6]
A0HTF2C004DA
[6] [4]
[3]
[6]
[1]
[2]
9J07F2C001DA
Field Service Ver. 1.0 Jul. 2009
2. Remove four screws [1] and remove
the cover [2].
3. Remove two screws [1], two springs
[2], and two pieces of fixation metals
[3].
Remove two C-clips [4], the bushing
[5], and the pick-up/feed roller assy
[6].
4. Remove the C-ring [1] and the lever
[2].
5. Remove three C-rings [3].
6. Remove two pins [4].
7. Remove the belt [5].
8. Remove two pick-up rollers [6].
NOTE
• Be careful not to lose the pin.