Konica Minolta bizhub C360 Service Manual page 573

14. BILLING SETTING
✽ Count-up table
Print mode
Sizes other than
Size
those specified
Mode
Total
Size
2-sided Total
0: No count; 1: 1 count; 2: 2 counts; 3: 3 counts; 4: 4 counts
(3) Long Length Paper Counter Mode
• When printing on the long paper (457.2 mm or over), the counting value will be the total
of the value set by the total counter mode and the value by this setting.
• The default setting is Mode 4.
Mode 1 : + 0 count
Mode 2 : + 1 count
Mode 3 : + 2 counts (457.2 to 915.0 mm will be + 1 count)
Mode 4 : + 3 counts (457.2 to 686.0 mm will be + 1 count,
(4) Banner Counter Double Count Mode
• To set whether to use normal count or double count when printing long size paper.
• When "ON" is selected, double count is applied to only long size paper.
• The default setting is OFF.
* The count method used when printing long size paper depends on the combination of the
above count mode settings: Settings in Long Length Paper Counter Mode and Banner
Counter Double Count Mode. The following shows details on count methods that are the
combination of each setting.
Long Length
Total Counter Paper Counter
Mode 1
518
1-Sided
Specified
sizes
Mode Mode
1 2 1 2
1 1 1 2
0 0 1 1
0 0 0 0
and 686.1 to 915.0 mm will be + 2 count)
ON
Banner Counter
Double Count
Mode Mode
Mode 1 OFF
ON
Mode 2 OFF
ON
Field Service Ver. 2.1 Feb. 2012
2-Sided
Sizes other than Specified
those specified sizes
Mode Mode
1 2 1
2 2 2
0 0 2
1 1 1
"OFF"
paper size
Normal size
Long size
Normal size
Long size
Normal size
Long size
Normal size
Long size
2
4
2
1
Count
1 count
1 count
1 count
2 counts
1 count
2 counts
1 count
4 counts