Outline; Outline; Updating The Firmware With The Internet Isw; Service Environment - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
7.3

Updating the firmware with the Internet ISW

7.3.1

Outline

• [Internet ISW] is the system which gives the instruction for updating the firmware with the
control panel of the main body, so the main body will automatically receive the firmware
from the program server over a network for updating. With the Internet ISW, the firmware
can be updated when the CE is at the user's without firmware data.
7.3.2

Service environment

The following conditions are necessary for using the Internet ISW function.
• The main body is connected to such a network environment that the firmware can be
downloaded on the internet using the ftp or http protocol.
The "Internet ISW" will not operate under the following conditions.
• Main power switch is set to OFF.
• Sub power switch is set to OFF.
• When the following setting is set to "ON":
[Administrator Setting] → [Security Setting] → [Enhanced Security Mode]
• Machine is operating, or there are jobs present (including appointed jobs).
• Machine is in idle with suspended job
• Paper jam has occurred
• Image file is in the memory
• Model or the circuit board of the program does not match
7.3.3

Preparations for firmware rewriting

• For using the Internet ISW, the network parameter, program server address as well as
firewall address need to be set to the main body.
• For details of each setting item, refer to Adjustment/Setting "Internet ISW".
See P.505
A. Internet ISW Set
1. Call the Service Mode to the screen.
2. Touch [Internet ISW Set] which is available from [Internet ISW].
7. FIRMWARE REWRITING
A0P0F2E585DA
153