Fax Settings-Network Fax Settings - Konica Minolta bizhub C360 Service Manual

10. UTILITY
C. Multi Lines Setting
(1) Use
• To set the system for using each line when using more than one line.
(2) Procedure
<Multi Line Usage>
• When selecting [Normal], perform the transmission setting for Line 2.
<Line 2 Setting>
• The default setting is TX and RX.
"TX and RX"
D. Sender Fax No.
(1) Use
• To register the fax ID when using the additional line.
(2) Procedure
• Use 10-key pad or [+] / [space], enter the fax ID (up to 20 characters).
10.6.77

Fax Settings-Network Fax Settings

• It will be displayed only when either [IP Address Fax] or [Internet Fax] is set to "ON" in the
following settings.
[Administrator Settings] → [Network Settings] → [Network Fax Settings] → [Network Fax
Function Settings]
A. Black Compression Level
• It will be displayed only when either [IP Address Fax] or [Internet Fax] is set to "ON" in the
following settings.
[Administrator Settings] → [Network Settings] → [Network Fax Settings] → [Network Fax
Function Settings]
(1) Use
• To set black compression level at black TX mode when network fax function is being
used.
(2) Procedure
• The default setting is MH.
"MH"
332
Field Service Ver. 2.1 Feb. 2012
RX Only
MR
TX Only
MMR