10. UTILITY
C. IPv6 Settings
(1) Use
• To set whether or not to use IP address (IPv6).
• To set whether to enter the IP address (IPv6) directly or to obtain it automatically.
(2) Procedure
• The default setting is ON.
<Auto IPv6 Setting>
• To set whether or not to automatically obtain IP address (IPv6).
When selecting [OFF], set a global address or gateway address.
• The default setting is ON.
<DHCPv6 Setting>
• The default setting is ON.
D. DNS Host
(1) Use
• To set the DNS host name.
• To set whether or not to enable the dynamic DNS setting.
(2) Procedure
<DNS Host Name>
1. Touch [DNS Host Name].
2. Enter the DNS host name on the screen key board, and touch [OK].
<Dynamic DNS Settings>
• The default setting is No Limit.
272
"ON"
"ON"
"ON"
Enable
Field Service Ver. 2.1 Feb. 2012
OFF
OFF
OFF
"No Limit"