Field Service Ver. 2.1 Feb. 2012
13.3.3
Administrator Feature Level
A. Use
• To set which modes to be allowed for the administrator to use in Service Mode.
• Use when allowing the administrator to use some modes in Service Mode.
• The modes allowed for the administrator to use in each setting are as follows.
[System Setting] →
[Expert Setting]
[Standard Size
Setting]
B. Procedure
• The default setting is Prohibit.
Level1
13.3.4
CE Authentication
• It will not be displayed when the following settings are set to "ON".
[Administrator Settings]
Rules].
A. Use
• To determine whether or not to authenticate CE password as entering Service Mode.
• Use when authenticating CE password as entering Service Mode.
NOTE
• For setting the following setting to "ON", set the CE Authentication to "ON" and
change the initial CE password beforehand.
[Administrator Settings] → [Security Setting] → [Enhanced Security Mode] or
[Password Rules]
B. Procedure
• The default setting is OFF.
Administrator settings function
Printer
Erase Leading Edge
Adjustment
Scanner
Leading Edge Adjustment
Adjustment
Centering
Horizontal Adjustment
Vertical Adjustment
ADF Adjustment Centering
Original Stop Position
Centering Auto Adjustment
Auto Adj. of Stop Position
User paper Settings
Original Glass Original Size Detect
Foolscap Size Setting
Level2
→
[Security Setting]
ON
13. ENHANCED SECURITY
"Prohibit"
→
[Enhanced Security Mode] or [Password
"OFF"
Level 1
Level 2
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
511