Image Background Adj - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
12.6.3

Image Background Adj

2
A. Use
• To adjust the highlight portion (fog level) to the target reproduction level by making an
auxiliary manual fine-adjustment of γ of each color after gradation adjust.
• Use when a foggy background occurs due to a printer problem.
B. Procedure
• The default setting is 0.
1. Call the Service Mode to the screen.
2. Touch these keys in this order: [Imaging Process Adjustment] → [Image Background
2
Adj].
3. Select the color to be adjusted.
4. Enter the new setting from the 10-key pad.
To make the background level foggier, decrease the setting value.
To make the background level less foggy, increase the setting value.
5. Touch [END] to return to the [Image Adjust] menu screen.
6. Touch [Stabilizer].
7. Touch [Stabilization Only].
8. Press the Start key to validate the adjustment value.
9. Check the print image for any image problem.
NOTE
• If the setting value has been changed, be sure to run an image stabilization
sequence to make valid the new value.
-5 to +5 (step: 1)
12. SERVICE MODE
393
2