Field Service Ver. 2.1 Feb. 2012
5.5.50
SODIMM (DIMM)
1. Remove the lower rear cover/1.
See P.57
[1]
[1]
[2]
[2]
[1]
[3]
[1]
A0EDF2C163DA
[1]
[1]
A0EDF2C153DA
[1]
A0EDF2C164DA
5. OTHER MAINTENANCE ITEMS
3. Remove seven screws [1], unhook
the tab [2], and remove the high volt-
age unit [3].
NOTE
• Install the high voltage unit so that
the machine terminals come into
contact with the counterparts on
the high voltage unit and the high
voltage unit properly fit into the tab.
2. Remove 12 screws [1], and remove
the MFP board protective shield [2].
3. Remove the SODIMM [1] on the
MFP board.
105