Konica Minolta bizhub C360 Service Manual page 288

Field Service Ver. 2.1 Feb. 2012
(4) Punch Regist Loop Size Adjustment
<Use>
• Adjusts the punch loop size used for paper exited from the main body.
• To address problems such as misaligned punch holes, wrinkled paper, and jam at the
punch registration section.
<Procedure>
1. Call the Administrator Settings to the screen.
2. Touch [System Settings] → [Expert Adjustment] → [Finisher Adjustment] → [Punch
Regist Loop Size Adjustment].
3. Touch the paper size where punch regist loop size is adjusted.
4. Set the correction value using the [+]/[-] keys.
Misaligned punched holes: Enter the value of [+]
Wrinkled paper: Enter the value of [-]
5. Touch [OK].
(5) Paper Alignment Plate Settings
<Use>
• Fine adjusts the paper alignment plate that aligns ejected paper when FS-529 is
installed.
<Procedure>
1. Call the Administrator Settings to the screen.
2. Touch [System Settings] → [Expert Adjustment] → [Finisher Adjustment] → [Paper
Alignment Plate Settings].
3. Select the [Paper Alignment Plate Pos.(Back)] or [Paper Alignment Plate Pos.(Front)].
The default setting is 0.0 mm.
Setting range: -10.0 mm to +10.0 mm (in 0.1 mm increments)
4. Set the correction value using the [+]/[-] keys.
5. Touch [OK].
D. Density Adjustment
(1) Thick Paper Image Density-Yellow, Magenta, Cyan, Black
<Use>
• To fine-adjust density of printed images of each color for thick paper and OHP transpar-
encies. (Only black color adjustable for OHP transparencies)
• To change the density of the printed image for each color with thick paper and OHP
transparencies
<Procedure>
1. Call the Administrator Settings to the screen.
2. Touch [System Settings] → [Expert Adjustment] → [Density Adjustment].
3. Select a type of thick paper and a color that need to be adjusted.
4. Touch the Lighter or Darker key to correct the image density.
Light color: Touch the Darker key.
Dark color: Touch the Lighter key.
10. UTILITY
233