Switchback Motor (M4); Fusing Pressure Roller Retraction Motor (M11) - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
5.5.61

Switchback motor (M4)

1. Remove the upper rear cover.
See P.57
[2] [3]
5.5.62

Fusing pressure roller retraction motor (M11)

1. Remove the upper rear cover.
See P.57
[1] [4]
[3]
[2]
[2]
[1]
A0EDF2C192DA
[2]
[3]
A0EDF2C193DA
[1]
A0EDF2C194DA
5. OTHER MAINTENANCE ITEMS
2. Disconnect the connector [1].
3. Remove two screws [2], and remove
the switchback motor [3].
2. Disconnect the connector [1], and
remove the harness from the wire
saddle [2].
3. Remove four screws [3], and remove
the fusing pressure roller retraction
motor assy [4].
4. Remove two screws [1], and remove
the fusing pressure roller retraction
motor [2].
117