10.3 Touch Panel Adjustment - Konica Minolta bizhub C360 Service Manual

10. UTILITY

10.3 Touch Panel Adjustment

A. Use
• To adjust the position of the touch panel display
• Make this adjustment if the touch panel is slow to respond to a pressing action.
• Use during the setup procedure.
B. Procedure
1. Press the Accessibility key.
2. Touch [Touch Panel Adj.].
3. Using the tip of a pen or similar object, touch the four keys (+) on the screen in
sequence.
• These crosses may be touched in any order; but be sure to touch the center of each
cross.
• Use care not to damage the screen surface with the tip of the pen.
4. Touching all four crosses will turn the Start key ON in blue.
5. Press the Start key.
182
Field Service Ver. 2.1 Feb. 2012
A0P0F3E544DA