System Settings-List/Counter - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
M. Erase Adjustment
(1) Non-Image Area Erase Operation Settings
<Use>
• Configure Non-Image Area operation settings.
Auto : Automatically detects the background density of the original, and selects
either [Bevel] or [Rectangular] accordingly.
Specify : Allows you to manually specify an erase method and original density. As an
erase method, select [Bevel] or [Rectangular]. Specify an original density from
five levels.
<Procedure>
• The default setting is Specify.
10.6.8

System Settings-List/Counter

A. Management List
• It will not be displayed when the following setting shows that vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(It will be displayed when the key counter is mounted or when the following setting shows
that switch No.33 is set to [01] at HEX assignment.
[Service Mode] → [System 2] → [Software Switch Setting])
(1) Job Settings List
<Use>
• To output the value set by the setting menu.
<Procedure>
1. Touch [Job Settings List].
2. Select the feed tray.
3. Select simplex or duplex print, and touch the Start key.
B. Paper Size/Type Counter
<Use>
• To register the combination of the specific paper size and the paper type, and to set the
count.
<Procedure>
1. Press a key out of 1 to 10 registration keys.
2. Select the paper type.
3. Touch the paper size key to select the paper size.
Auto
10. UTILITY
"Specify"
249