Registration Roller Clutch (Cl4) - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
[1]
[3] [2]
[4]
[1]
5.5.74

Registration roller clutch (CL4)

1. Remove the conveyance unit.
See P.82
[1]
[3]
A0EDF2C221DA
[2]
[3]
A0EDF2C222DA
[2]
A0EDF2C223DA
5. OTHER MAINTENANCE ITEMS
3. Remove four screws [1] and the E-
ring [2], and remove the developing
clutch/K cover [3].
4. Remove the harness from the edge
cover [1].
5. Disconnect the connector [3],
remove the E-ring [2], and remove
the developing clutch/K [4].
NOTE
• When mounting the developing
clutch/K, set the convex part of the
stopper into the concave part of the
developing clutch/K [4].
2. Disconnect the connector [1],
remove the E-ring [2], and remove
the registration roller clutch [3].
NOTE
• When mounting the registration
roller clutch, set the convex part of
the stopper into the concave part of
the registration roller clutch [3].
129