10. UTILITY
B. Procedure
<Current Setting>
• The settings made on the control panel before entering the setting menu screens are
registered as the default settings of fax/scan functions.
<Factory Default>
• The settings made at the time of shipment from the factory are registered as the default
settings of fax/scan functions.
10.5.41
Scan/Fax Settings-Default Enlarge Display Settings
• Displayed only when you select [Utility/Counter] → [User Settings] → [Scan/Fax Settings]
in the enlarge display mode.
A. Use
• To make default settings for the enlarge display mode.
* The machine is initialized at the following timings:
• The main power switch is turned ON.
• Panel is reset.
• In an Interrupt mode.
• Auto Reset
• The password entry screen for account track is changed.
B. Procedure
<Current Setting>
• The settings made on the control panel before entering the setting menu screens are
registered as the default settings of fax/scan functions.
<Factory Default>
• The settings made at the time of shipment from the factory are registered as the default
settings of fax/scan functions.
10.5.42
Scan/Fax Settings-Compact PDF/XPS Compression Level
A. Use
• Selects a compression method applied to scanned data that is produced with the use of
Compact PDF/XPS in the scan/fax mode.
High Quality
Standard
High Compression : Makes the compression rate higher and puts priority in lowering
B. Procedure
• The default setting is Standard.
High Quality
204
: Lowers the compression rate and puts priority in quality while
scanning.
: Compression rate and quality are normally balanced while scan-
ning.
the data volume while scanning.
"Standard"
Field Service Ver. 2.1 Feb. 2012
High Compression