Printer Settings-Pcl Settings - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
E. Staple
• It will be displayed only when the optional finisher is mounted.
(1) Use
• To set whether to staple or not when not specified by the printer driver during PC printing.
• To use hen staple is not specified by the printer driver during printing by the Windows
DOS, etc.
(2) Procedure
• The default setting is OFF.
1 Position
F. Punch
• It will be displayed only when the optional finisher and punch kit are mounted.
(1) Use
• To select whether to make punch-holes or not when not specified by the printer driver
during PC printing.
• To use when the printer driver cannot specify punching during printing from Windows
DOS, etc.
(2) Procedure
• The default setting is OFF.
* The number of punch holes being set is available from [Service Mode] → [Finisher].
G. Banner Paper Tray
(1) Use
• To set the feed tray for printing on the banner (front cover) page.
(2) Procedure
• The default setting is Auto.
10.5.48

Printer Settings-PCL Settings

A. Font Settings
(1) Use
• To set the font when not specified by the printer driver during PC printing.
• To use when the printer driver cannot specify the font during printing from Windows DOS,
etc.
• It can be selected from the Resident font or the download font.
(2) Procedure
• The default setting is Courier.
1. When selecting from the Internal font, touch [Internal], and select the one from the dis-
played font list.
2 Position
2-Hole/3-Hole/4-Hole
10. UTILITY
"OFF"
"OFF"
209