Registration Motor (M2) - Konica Minolta bizhub C360 Service Manual

3. OTHER MAINTENANCE ITEM
3.3.12

Registration motor (M2)

1. Remove the rear cover.
See P.17
2. Remove the take-up motor.
See P.31
[1]
[1]
8. Reinstall the above parts following the removal steps in reverse.
28
[1]
[3]
[4]
[2]
A0HUF2C018DA
[2]
A0HUF2C019DA
[2]
A0HUF2C020DA
Field Service Ver. 1.0 Jul. 2009
3. Disconnect three connectors [1].
4. Remove the harness from three wire
saddles [2].
5. Remove the screw [3], remove the
ground terminal [4].
6. Remove the E-ring [1] and the bush-
ing [2].
7. Remove four screws [1], and remove
the registration motor assy [2].