Advertisement
1.3 Setting Machine Access
1.3
Setting Machine Access
Access Lock
The "Access Lock" function is used to specify whether ("On") or not ("Off") access
to Administrator mode, lock jobs and user boxes is monitored.
If the "Access Lock" function is set to "On", the number of incorrect attempts to ac-
cess Administrator mode, lock jobs and user boxes is counted. After three incorrect
attempts, access to the machine is denied. To allow Administrator mode to be ac-
cessed again, turn the machine off, then on again. However, to allow lock jobs and
user boxes to be accessed again, the penalty must be removed. For more details,
refer to the Printer Controller User Manual.
To make settings for the "Access Lock" function
1
Follow the procedure described in "To display the Administrator Management
screens" on page 1-1 to display the Administrator Management screen.
2
Touch [Admin. 2], and then touch
[Access Lock].
3
To use the "Access Lock" function,
touch [ON]. To stop using the
"Access Lock" function, touch
[OFF].
Di2010/Di2010f/Di2510/Di2510f/Di3010/Di3010f/Di3510/Di3510f
1
1-5
Advertisement
