Konica Minolta bizhub C360 Service Manual page 975

2. PERIODICAL MAINTENANCE PROCEDURE
[2]
5. Reinstall the above parts following the removal steps in reverse.
NOTE
• Install the separation roller assy while pressing the holder down so that it aligns to
the metal bracket of the machine.
• Make sure that the separation roller assy is not tilted to the right or left when
installed.
4
[3]
[1]
A093F2C502DA
Field Service Ver. 1.0 Jul. 2009
4. Remove the C-ring [1] and the guide
[2], and remove the separation roller
assy [3].
A093F2C503DA