System Settings-Auto Color Level Adjust; System Settings-Power Save Settings - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
D. Print Lists
• It will not be displayed when the following setting shows that authentication device or the
vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(It will be displayed when the key counter is mounted.)
• It will not be displayed when the authentication device 1 is set to "Set" by the following
setting.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(1) Use
• To set the paper feed tray for output the list for the meter count or the unit check.
• It sets the simplex/duplex printing of the output for the sales counter or the unit check list.
(2) Procedure
<Paper tray>
• The default setting is Tray 1.
<Simplex/Duplex>
• The default setting is 1-Sided.
10.5.4

System Settings-Auto Color Level Adjust.

A. Use
• To set the criterion level to discriminate between a colored original and a black-and-white
original in the auto color mode.
B. Procedure
• Five levels are available to choose from and the default setting is 3.
10.5.5

System Settings-Power Save Settings

• It will be displayed only when the following setting is set to "Level 1" or "Level 2."
[Administrator Settings] → [Security Setting] → [Administrator Security Level]
• It will not be displayed when the following setting shows that authentication device 1 or
the vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
A. Low Power Mode Settings
(1) Use
• To set the time until low power starts operating after the last key operation has been
completed.
• Low power: To turn LED and LCD OFF, and lower the power consumption.
(2) Procedure
• Use the 10-key pad for setting.
• The default setting is 15 min.
Black Standard
1 2 "3"
"15 min." (10 to 240)
Full Color
4 5
10. UTILITY
189