4.10 Registration Section; Cleaning Of The Timing Roller; 4.11 Fusing Section; Replacing The Fusing Unit - Konica Minolta bizhub C360 Service Manual

All-in-one color laser mfp

Hide thumbs Also See for bizhub C360:

Table of Contents

Field Service Ver. 2.1 Feb. 2012

4.10 Registration section

A. Periodically cleaning parts/cycle

• Timing roller: Every 60,000 counts (upon each call)

B. Procedure

1. Open the right door and the regist unit.

• The temperature gets high in the vicinity of the fusing unit. You may get

burned when you come into contact with the area. Before replacement

operations, make sure that more than 20 minutes have elapsed since the

main and sub power switches were turned off.

A. Periodically replacing parts/cycle

• Fusing unit: Every 523,000 counts

B. Procedure

1. Remove the rear right cover.

4. PERIODICAL MAINTENANCE PROCEDURE

2. Using a cleaning pad with alcohol,

A0EDF2C035DA

2. Disconnect two connectors [1].

A0EDF2C007DA

wipe the timing roller [1] clean of dirt.

Show Quick Links

Table of Contents

Bizhub c280 Bizhub c220